2. Connect (+) - a battery conclusion to a conclusion 1, and (-) - a conclusion – to the electric motor case. The electric motor has to rotate with high speed.
3. Start the electric motor with a small speed, and disconnect a crossing point from a conclusion 2 in any situation except a self-locking device. Connect conclusions 2 and 3 and power a conclusion 4 (concerning the case). The electric motor has to be switched-off in a self-locking device position (see rice. The scheme of check of shutdown of the electric motor in the provision of a self-locking device).
4. If results these checks negative, then the electric motor replace.
Drafts of a screen wiper
1. Electric motor
2. Draft
Replacement of the electric motor of a forward screen wiper
PERFORMANCE ORDER
1. Remove a lattice of an air inlet and disconnect the electric motor socket.
2. Turn off bolts of fastening of a screen wiper (bolts are specified by shooters).
3. Get the electric motor and bring the lever out of gearing with draft.
