Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
- 11. Electric equipment
   11.1. Specifications
   11.2. Battery
   + 11.3. System of ignition
   11.4. Coil (i) of ignition
   11.5. Ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. Block of electronic ignition
   11.8. Induction sensor
   + 11.9. System of a charge of the battery
   + 11:10. Generator
   11:11. System of launch of the engine
   + 11:12. Starter electric motor
   11:13. Traction relay
   11:14. Check of tension
   11:15. Detection of short circuit
   11:16. Check of reliability of grounding
   11:17. Check of integrity of a chain
   11:18. Finding of not closed chain
   11:19. Search of malfunctions
   11:20. Safety locks
   11:21. Fusible crossing points
   11:22. Breakers
   11:23. Relay
   11:24. Breaker of indexes of turn / alarm system
   11:25. Switch of indexes of turn
   11:26. Lock of ignition and drum of the lock
   11:27. Switch of external lighting
   11:28. Screen wiper switch
   11:29. Lamps of headlights
   11:30. Adjustment of headlights
   11:31. Headlight case
   11:32. Replacement of lamps
   11:33. Receiver and loudspeakers
   11:34. Antenna
   + 11:35. Screen wiper electric motor
   11:36. Switch of heating of back glass
   11:37. Heater of back glass
   11:38. Guard of devices
   11:39. Sound signal
   11:40. Electric drive of mirrors
   11:41. Cruise control
   + 11:42. Window regulator electric drive
   11:43. Electric drive of door locks
   11:44. Safety cushions
+ 12. Electrical circuitries


2403db43

11:39. Sound signal

Check

PERFORMANCE ORDER
1. On the cars "Toyotas 4 Runner/Hilux/Surf" 2 sound signals established on both parties from a radiator are provided.
2. For check disconnect the socket and directly connect the battery to a signal. In the absence of a sound replace a signal.
3. If the sound is, then check tension on a conclusion when pressing the signal button. In the presence of tension check connection with weight.
4. If there is no tension, then check the relay. It is necessary to consider that relays of a sound signal generally have the 4 or 3 conclusion (3-output relays have external connection with weight).
5. If relays are serviceable, then check tension on relay conclusions. If there is no tension, then check wires from a safety lock to the relay.
6. If on relay conclusions tension is, then press the button of a signal and check a chain of connection with weight between the relay and the button. If there is no break, then replace the signal button.
7. If via the button the chain on weight becomes isolated, then check existence in a chain from the relay for the button of break or short circuit.

Replacement

PERFORMANCE ORDER
1. For replacement of a sound signal disconnect the socket and turn off a bolt (it is specified by an arrow).
2. Remove a signal and establish new.
3. Further installation is carried out upside-down.