Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
- 11. Electric equipment
   11.1. Specifications
   11.2. Battery
   + 11.3. System of ignition
   11.4. Coil (i) of ignition
   11.5. Ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. Block of electronic ignition
   11.8. Induction sensor
   + 11.9. System of a charge of the battery
   + 11:10. Generator
   11:11. System of launch of the engine
   + 11:12. Starter electric motor
   11:13. Traction relay
   11:14. Check of tension
   11:15. Detection of short circuit
   11:16. Check of reliability of grounding
   11:17. Check of integrity of a chain
   11:18. Finding of not closed chain
   11:19. Search of malfunctions
   11:20. Safety locks
   11:21. Fusible crossing points
   11:22. Breakers
   11:23. Relay
   11:24. Breaker of indexes of turn / alarm system
   11:25. Switch of indexes of turn
   11:26. Lock of ignition and drum of the lock
   11:27. Switch of external lighting
   11:28. Screen wiper switch
   11:29. Lamps of headlights
   11:30. Adjustment of headlights
   11:31. Headlight case
   11:32. Replacement of lamps
   11:33. Receiver and loudspeakers
   11:34. Antenna
   + 11:35. Screen wiper electric motor
   11:36. Switch of heating of back glass
   11:37. Heater of back glass
   11:38. Guard of devices
   11:39. Sound signal
   11:40. Electric drive of mirrors
   11:41. Cruise control
   + 11:42. Window regulator electric drive
   11:43. Electric drive of door locks
   11:44. Safety cushions
+ 12. Electrical circuitries



11:26. Lock of ignition and drum of the lock

Check

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect a safety cushion (see subsection 11.44).
3. Remove a wheel.
4. Remove a casing of a steering column.
5. Hook and get an overlay of the lock of ignition.
6. Disconnect sockets from the lock.
7. Check existence of a chain between lock conclusions.
8. Between conclusions of a chain should not be in the LOCK lock family way.
9. The chain has to be in the ASS lock family way between conclusions 2 and 3.
10. The chain has to be in the ON lock family way between conclusions 2, 3 and 4 and conclusions 6 and 7.
11. The chain has to be in the START lock family way between conclusions 1, 2 and 4 and conclusions 6, 7 and 8.
12. Check lack of short circuit of contacts of the switch of the alarm system of the key left in the lock. For what transfer the switch to situation Off and get a key.
13. Insert a key and transfer the switch to situation On, between contacts 1 and 2 there has to be a chain.
14. If results of check negative, then the switch replace.

Replacement

PERFORMANCE ORDER
1. Execute stages 1-6.
2. Insert a key into the lock and transfer to the provision of ASSORTMENT.
3. Having inserted the thin screw-driver into the lower opening of the cast case of the lock, wring out a latch, at the same time giving the lock on themselves.
4. Installation is carried out upside-down.