Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
- 11. Electric equipment
   11.1. Specifications
   11.2. Battery
   + 11.3. System of ignition
   11.4. Coil (i) of ignition
   11.5. Ignition distributor
   11.6. Check and installation of the moment of ignition
   11.7. Block of electronic ignition
   11.8. Induction sensor
   + 11.9. System of a charge of the battery
   + 11:10. Generator
   11:11. System of launch of the engine
   + 11:12. Starter electric motor
   11:13. Traction relay
   11:14. Check of tension
   11:15. Detection of short circuit
   11:16. Check of reliability of grounding
   11:17. Check of integrity of a chain
   11:18. Finding of not closed chain
   11:19. Search of malfunctions
   11:20. Safety locks
   11:21. Fusible crossing points
   11:22. Breakers
   11:23. Relay
   11:24. Breaker of indexes of turn / alarm system
   11:25. Switch of indexes of turn
   11:26. Lock of ignition and drum of the lock
   11:27. Switch of external lighting
   11:28. Screen wiper switch
   11:29. Lamps of headlights
   11:30. Adjustment of headlights
   11:31. Headlight case
   11:32. Replacement of lamps
   11:33. Receiver and loudspeakers
   11:34. Antenna
   + 11:35. Screen wiper electric motor
   11:36. Switch of heating of back glass
   11:37. Heater of back glass
   11:38. Guard of devices
   11:39. Sound signal
   11:40. Electric drive of mirrors
   11:41. Cruise control
   + 11:42. Window regulator electric drive
   11:43. Electric drive of door locks
   11:44. Safety cushions
+ 12. Electrical circuitries



11:40. Electric drive of mirrors

GENERAL INFORMATION

Numbering of conclusions of the switch of the electric drive of mirrors

1. Left side

2. Right side

3. Up

4. Down


Numbering of conclusions of the switch of the electric motor of mirrors

 


PERFORMANCE ORDER
1. The drive of a mirror is carried out from 2 electric motors of vertical and horizontal shift.
2. Include ignition (not to start the engine) and lower side glasses. The selector which is built in in the switch include the necessary mirror and check operation of the drive of the right and left mirrors, displacing them to the right and to the left, up and down. Listen to operation of electric motors.
3. If operation of electric motors is listened, and the mirror does not move, then the drive mechanism in a mirror is faulty. Remove a mirror and sort.
4. If operation of electric motors is not listened and mirrors do not move, then check a safety lock.
5. If the safety lock is serviceable, then get the switch, without disconnecting wires. Include ignition and check tension on the switch. If there is no tension, then check wires from a safety lock to the switch. Otherwise check the switch for what perform the following operations (see rice. Numbering of conclusions of the switch of the electric drive of mirrors).
Left mirror
6. The chain has to be in the UP switch family way between conclusions 6 and 10, and also between conclusions 1 and 9.
7. The chain has to be in the DOWN switch family way between conclusions 1 and 10, and also between conclusions 6 and 9.
8. The chain has to be in the LEFT switch family way between conclusions 5 and 9, and also between conclusions 6 and 10.
9. The chain has to be in the switch family way RIGHT between conclusions 5 and 10, and also between conclusions 6 and 9.
Right mirror
10. The chain has to be in the UP switch family way between conclusions 6 and 10, and also between conclusions 1 and 9.
11. The chain has to be in the DOWN switch family way between conclusions 1 and 10, and also between conclusions 6 and 9.
12. The chain has to be in the LEFT switch family way between conclusions 5 and 9, and also between conclusions 6 and 10.
13. The chain has to be in the switch family way RIGHT between conclusions 5 and 10, and also between conclusions 6 and 9.
14. If results of checks negative, then the switch replace.
15. Attach the switch. Find a wire from the switch on weight. Without disconnecting the switch close a crossing point this wire on weight. If the mirror works normally with a crossing point, then repair "regular" connection with weight.
16. If the mirror does not work, then sort a mirror and check presence of tension on wires. Include ignition and transfer the switch to all provisions, checking tension. On one of wires from the switch tension has to be in each its family way (except for situation Off).
17. If tension is absent, then check a chain from a mirror to the switch.
18. If tension is, then check the electric motor, having arrived as follows (see rice. Numbering of conclusions of the switch of the electric motor of mirrors).     
19. Check movement of a mirror to the left for what connect a crossing point (+) - a battery conclusion with a conclusion 3, and (-) - a conclusion – with a conclusion 1.
20. Change polarity and be convinced that the mirror moves to the right
21. Check movement of a mirror up for what connect a crossing point (+) - a battery conclusion with a conclusion 2, and (-) - a conclusion – with a conclusion 1.
22. Change polarity and be convinced that the mirror moves down.
23. If results of checks negative, then a mirror assembled replace.

2403db43 2403db43