Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Frequency of maintenance and types of scheduled works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of steering
   2.9. Replacement of oil in the engine and an oil filter
   2.10. Care of the battery
   2.11. Check of the cooling system
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of steering
   2.16. Lubricant of a running gear, suspension brackets, steering and details of a body
   2.17. Check of the exhaust system
   2.18. Check of level of oil in the manual transmission
   2.19. Check of level of oil in the transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of half shafts
   2.23. Zolotnik of ventilation of a case
   2.24. The filtering element of the air filter
   2.25. Belts of the drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, runner and cover of the distributor
   2.33. Care of the cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Replacement of liquid in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Valve check of system of recirculation
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries



2.28. Check and adjustment of pedals of coupling (brake)

PEDAL HEIGHT

PERFORMANCE ORDER
1. Check distance of pillows of pedals from a floor. If this distance differs from norm, then adjust.
2. For adjustment of a pedal of coupling release a lock-nut of an adjusting bolt or the switch (A), release a rod lock-nut (In). Rotating a rod, adjust distance so that it corresponded to the middle of range. Tighten a rod lock-nut.
3. For check of height of a pedal of a brake start the engine and press several times a pedal then check pedal height. For adjustment release a lock-nut of an adjusting bolt or the switch (A), release a rod lock-nut (In). Rotating a rod, adjust distance so that it corresponded to the middle of range. Tighten a rod lock-nut.
4. Wrap the switch or a bolt of the limiter clockwise before contact with the platform of a pedal. Tighten a lock-nut.

FREE WHEELING OF THE PEDAL

PERFORMANCE ORDER
1. Press a pedal a finger and measure distance to feeling of weakness in resistance to movement.
2. In need of adjustment of a free wheeling of a pedal of coupling release a lock-nut of a rod and displace a rod so that the free wheeling met standard. Tighten a lock-nut.
3. For adjustment of a free wheeling of a pedal of a brake on the stopped engine press 10–12 times a pedal then check the course. Release a lock-nut of a rod and displace a rod so that the free wheeling met standard. Tighten a lock-nut.

2403db43 2403db43