Toyota 4ranner + 1. Maintenance instruction - 2. Maintenance 2.1. Specifications 2.2. Arrangement of knots and units + 2.3. Frequency of maintenance and types of scheduled works 2.4. Intensive service + 2.5. Check of level of liquids 2.6. Check of tires 2.7. Check of level of liquid in automatic transmission 2.8. Liquid level in system of a hydraulic actuator of steering 2.9. Replacement of oil in the engine and an oil filter 2.10. Care of the battery 2.11. Check of the cooling system 2.12. Check of a condition of the hoses located in a motor compartment 2.13. Screen wiper brushes 2.14. Shift of wheels 2.15. Check of a suspension bracket of steering 2.16. Lubricant of a running gear, suspension brackets, steering and details of a body 2.17. Check of the exhaust system 2.18. Check of level of oil in the manual transmission 2.19. Check of level of oil in the transfer case 2.20. Check of level of oil in a reducer 2.21. Check of seat belts 2.22. Check of covers of half shafts 2.23. Zolotnik of ventilation of a case 2.24. The filtering element of the air filter 2.25. Belts of the drive of hinged units 2.26. Check of fuel system 2.27. Check of wear of brakes 2.28. Check and adjustment of pedals of coupling (brake) 2.29. Replacement of candles 2.30. Check and adjustment of gaps in valves 2.31. Replacement of the fuel filter 2.32. High-voltage wires, runner and cover of the distributor 2.33. Care of the cooling system 2.34. Naves and bearings of forward wheels 2.35. Replacement of liquid in automatic transmission and the filter + 2.36. Oil replacement 2.37. Check of a tank with an absorber 2.38. Valve check of system of recirculation + 3. Engines + 4. Systems of heating, ventilation + 5. Fuel and exhaust systems + 6. Transmissions + 7. Transmission elements + 8. Brake system + 9. Suspension bracket and steering + 10. Body + 11. Electric equipment + 12. Electrical circuitries
|
The recommended viscosity of oil for the engine in various ranges of temperature
1. Hot weather 2. For petrol engines
|
3. Labels by which be guided, buying oil 4. Cold weather |
Arrangement of cylinders, direction of rotation of the distributor operating procedure of the 4-cylinder engine
1. 2,7 l of 1998.
|
2. 2,7 l of 1994-97.
|
Arrangement of cylinders on V6 engines with a volume of 3,4 l
The recommended lubricants and liquids
Oil for the engine |
API SG or SJ engine oil
|
Viscosity |
|
Cooling liquid |
Antifreeze on the basis of ethylene glycol in mix with the distilled water
|
Liquid of a hydraulic actuator of brakes |
DOT3
|
Coupling hydraulic actuator |
DOT3
|
Liquid for the power steering |
Liquid of automatic transmission Dexron II
|
Automatic transmission |
Liquid for automatic transmission of Dexron type II
|
Manual transmission |
API GL-4 or GL-5 SAE 75W-90
|
Transfer case |
API GL-4 or GL-5 SAE 75W-90
|
Reducer of the back bridge: |
Forward |
Gipoidny API GL-5 SAE 75W-90 oil
|
Back: |
|
– it is above 30 °C |
Gipoidny API GL-5 SAE 90 oil
|
– to 30 °C |
Gipoidny API GL-5 SAE 80W-90 oil
|
Lubricant of details of a suspension bracket, running gear and body |
Litol (NLGI N2)
|
Filling capacities of the Toyota 4 Runner/Hilux/Surf (l) car
Oil for the engine (taking into account the capacity of an oil filter): |
– 4-cylinder (2,7l) |
6,5
|
– V6 (3,4 l) |
6,2
|
The cooling system of cars with the 4-cylinder engine (2WD and 4WD): |
– with a back heater |
13,2
|
– without back heater |
12,1
|
With the V6 engine: |
– with a back heater |
13,2
|
– without back heater |
12,1
|
Cars 2WD and 4WD with the V6 engine: |
– with a back heater |
10,8
|
– without back heater |
9,3
|
Automatic transmission (the merged and filled volume) |
1,9 (2WD) and 2,4 (4WD)
|
Manual transmission: |
– on 4-cylinder engines |
3,1
|
– on V6, 2,6 (2WD) engines |
3,1 (4WD)
|
Transfer case |
1,35
|
Forward (back) reducer |
Forward reducer: |
– with automatic inclusion of the forward bridge through the left half shaft (with ADD system)
|
1,35
|
– with a self-locking nave |
1,35
|
Back reducer: |
– cars 2WD
|
3,3
|
– cars 4WD: |
• with self-locking differential |
3,3
|
• with usual differential |
3,0
|
Type of spark plugs and gap between electrodes: |
On 4-cylinder engines: |
– type 1 |
Nippondenso K16R-U or equivalent, gap of 0,78 mm
|
– type 2 |
NGK BKR5EYA or equivalent, gap of 0,78 mm
|
On V6 engines: |
– type 1 |
Nippondenso K16TR-11 or equivalent, gap of 1,1 mm
|
– type 2 |
NGK BKR5EYA or equivalent, gap of 1,1 mm
|
Idling turns: |
– on 4-cylinder engines |
650 – 750 rpm
|
– on V6 engines |
650 – 750 rpm
|
Prevention
If the data specified on the podkapotny plate differ, then be guided by data of the plate.
|
Direction of rotation of the roller of the distributor and operating procedure of cylinders: |
– on 4-cylinder engines (cm. rice. Arrangement of cylinders, direction of rotation of the distributor operating procedure of the 4-cylinder engine): |
• operating procedure |
1–3–4–2
|
• direction of rotation |
counterclockwise
|
– on V6 engines with a volume of 3,4 l the distributor is absent, an operating procedure |
|
Gap in valves (mm): |
– 4-cylinder engines (on the cold engine) |
• for inlet valves |
0,18 – 0,23
|
• for final |
0,25 – 0,33
|
– l V6 3,4 engines (on the cold engine) |
• for inlet valves |
0,16 – 0,23
|
• for final |
0,28 – 0,35
|
Coupling pedal (in mm): |
– height |
171 – 183
|
– free wheeling |
5 – 15
|
Brakes (in mm): |
Extreme thickness of frictional overlays of disk and drum brakes |
1,6
|
Pedal: |
– height |
158 – 168 (till 1996), 161 – 171 (since 1997)
|
– free wheeling |
0,3 – 0,6
|
The number of clicks of the emergency brake before full braking |
7 – 9
|
Suspension bracket and steering (mm): |
– side play of a steering wheel |
no more than 40
|
– side play of spherical support |
0
|
Inhaling moments (N. of m)
Bolts of fastening of the pallet of automatic transmission |
6
|
Drain stopper of the pallet of automatic transmission |
24
|
Traffic jams of the transfer case |
30
|
Traffic jams of reducers |
44
|
Spark plugs |
24
|
Drain stopper of the pallet of the engine |
24
|
Nuts of wheels |
103
|
|
|