Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Frequency of maintenance and types of scheduled works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of steering
   2.9. Replacement of oil in the engine and an oil filter
   2.10. Care of the battery
   2.11. Check of the cooling system
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of steering
   2.16. Lubricant of a running gear, suspension brackets, steering and details of a body
   2.17. Check of the exhaust system
   2.18. Check of level of oil in the manual transmission
   2.19. Check of level of oil in the transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of half shafts
   2.23. Zolotnik of ventilation of a case
   2.24. The filtering element of the air filter
   2.25. Belts of the drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, runner and cover of the distributor
   2.33. Care of the cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Replacement of liquid in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Valve check of system of recirculation
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries



2.10. Care of the battery

GENERAL INFORMATION

Corrosion of a pole of the battery

 

Removal of a polar tip

At first the mass wire is removed.

PERFORMANCE ORDER
1. Care of the battery comes down to check of a condition of poles and plugs, existence of dribbles of electrolyte and corrosion on adjacent metal details, to periodic check of tension and charging.
2. The places struck with corrosion should be washed out solution of soda and to paint zinc soil. Plugs and poles should be cleared to gloss, at the same time not to a sdeformiruyta a conical part of plugs. When cleaning it is necessary to remove corrosion completely.
3. It is recommended to charge the battery (except unattended) with current 2 A within 12–16 hours. For check of capacity the battery is recommended to be charged with current in 1/10 capacities expressed in ampere-hours.
4. Check electrolyte density. On a part of batteries there are built-in areometers of chromatic type. Electrolyte density in such battery is determined by the color chart enclosed by the manufacturer (dark coloring of the indicator usually indicates the full category of the battery).