Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and units
   + 2.3. Frequency of maintenance and types of scheduled works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tires
   2.7. Check of level of liquid in automatic transmission
   2.8. Liquid level in system of a hydraulic actuator of steering
   2.9. Replacement of oil in the engine and an oil filter
   2.10. Care of the battery
   2.11. Check of the cooling system
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of steering
   2.16. Lubricant of a running gear, suspension brackets, steering and details of a body
   2.17. Check of the exhaust system
   2.18. Check of level of oil in the manual transmission
   2.19. Check of level of oil in the transfer case
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of half shafts
   2.23. Zolotnik of ventilation of a case
   2.24. The filtering element of the air filter
   2.25. Belts of the drive of hinged units
   2.26. Check of fuel system
   2.27. Check of wear of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of gaps in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, runner and cover of the distributor
   2.33. Care of the cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Replacement of liquid in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Valve check of system of recirculation
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


2403db43

2.24. The filtering element of the air filter

Check and replacement

PERFORMANCE ORDER
1. The condition of the filter should be checked in breaks between replacements.
2. On engines of 3,4 l V6 the filter is mounted on the right side of a motor compartment.
3. On engines of 3,0 l V6 the filter is mounted on the left side of a motor compartment.
4. Disconnect latches. Disconnect all hoses which can interfere with removal of the filter from the case of the air filter. Get a cover, thereby having provided access to the replaced element (shooters specified latches on the filter case).
5. Get the filtering element.
6. Examine an external surface of an element, blow it at first from within, and then outside compressed air, previously having convinced of integrity and of lack of oiling of an element. If the purge does not yield results, then replace the filtering element.
7. The filtering element is established upside-down.