Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   - 7.2. Coupling
      7.2.1. Main cylinder of coupling
      7.2.2. Working cylinder of coupling
      7.2.3. Coupling details
      7.2.4. Release bearing
      7.2.5. The directing bearing
      7.2.6. Coupling hydraulic actuator
      7.2.7. Coupling pedal
      7.2.8. The blocking coupling switch
   + 7.3. Cardan shaft and cardan hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and half shaft of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward half shafts
   7.9. Replacement of covers and dismantling of the CV JOINT
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries

7.2.7. Coupling pedal

GENERAL INFORMATION

Height and free wheeling of a pedal of coupling

1. Place of definition of a side play of a pusher (free wheeling)

2. Place of adjustment of height of a pedal

3. Pedal height

4. Free wheeling

Check and adjustment

PERFORMANCE ORDER

1. Remove a rug to provide access to an antinoise covering.

2. Check pedal distance from a floor.

3. For adjustment remove the lower facing, release a lock-nut and rotating a bolt, adjust pedal height. Tighten a lock-nut.

4. Check a free wheeling, i.e. distance from the provision of completely released pedal to the place in which resistance to its course begins to be felt.

5. For adjustment release a lock-nut of a pusher and rotating a pusher, adjust the pedal course. Tighten a lock-nut.

6. Again check height and a free wheeling of a pedal. If necessary adjust.

7. Check adjustment of blocking coupling switch.