Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   + 7.2. Coupling
   + 7.3. Cardan shaft and cardan hinges
   7.4. Back and forward axes
   7.5. Bearing, epiploon and half shaft of the back bridge
   7.6. Epiploon of a reducer of the back bridge and forward axis
   7.7. Zadny Bridge
   7.8. Forward half shafts
   7.9. Replacement of covers and dismantling of the CV JOINT
   + 7.10. Electromagnetic drive of a forward leading axis (ADD system)
   7.11. Forward reducer
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


7.11. Forward reducer

GENERAL INFORMATION

Forward reducer

1. Drive switch socket
2. Vacuum hoses
3. Forward driveshaft
4. Hose of a sapun
5. Back support
6, 14. Lock ring
7. Left half shaft

8, 11 Laying
9. Drain stopper
10. Left forward support
12. Right forward support
13. Reducer
15. Right half shaft

Removal and installation

PERFORMANCE ORDER
1. Lift the car and remove wheels.
2. Remove the lower guard of the engine.
3. Merge oil from a reducer.
4. Disconnect the driveshaft.
5. Remove half shafts.
6. Disconnect a hose of a sapun, turn off 2 bolts of the holder and disconnect the socket and vacuum hoses of the electromagnetic drive of a forward leading axis.
7. Install under a reducer the cart with a jack.
8. Turn off a nut of a back support (a photo at the left) and nuts of two forward support (a photo on the right). Lower a reducer.
9. Installation is carried out upside-down.

2403db43 2403db43