Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   - 3.1. 4-cylinder engines
      3.1.1. Specifications
      3.1.2. The types of repair which are carried out without removal of the engine from the car
      3.1.3. Installation of the piston of the 1st cylinder in compression step VMT
      3.1.4. Cover of a head of cylinders
      3.1.5. The soaking-up collector
      3.1.6. Final collector
      3.1.7. Cam-shafts and pushers
      3.1.8. Head of cylinders
      3.1.9. Cover of the chain drive of cam-shafts
      3.1.10. Forward epiploon of the crankshaft
      3.1.11. Oil pallet
      3.1.12. Oil pump
      3.1.13. Flywheel (drive plate of the hydrotransformer)
      3.1.14. Back epiploon of the crankshaft
      3.1.15. Engine mount details
   + 3.2. V6 3,0 engines of l (1993-1994) and 3,4 l (since 1995)
   + 3.3. Dismantle and capital repairs of the engine
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries



3.1.4. Cover of a head of cylinders

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight (be convinced that radio tape recorder codes are known).
2. Remove an air inlet, disconnect hoses of ventilation of a case from a cover.
3. Remove caps of candles, disconnect wires.
4. Disconnect cables and take aside. Remove a hook for posting of the engine.
5. Turn off bolts of a cover of a head of cylinders (are specified by shooters), uncover also laying. If the cover does not give in, then displace it blows of the hammer through a soft pro-rate, or carefully open consolidation by the pallet.

Installation

PERFORMANCE ORDER
1. Carefully clear the condensed surfaces of a cover and a head of cylinders, remove oil traces. Establish new laying in a cover flute (laying can be not changed if it did not harden and on it there are no damages). Track safety of sealants of casings of candles (are specified by shooters).
2. Apply sealant on semicircular caps and establish them on a head of cylinders.
3. Carefully establish a cover and wrap bolts.
4. Evenly tighten cover bolts with the set moment.
5. Establish other details, start the engine and be convinced of lack of a leak.

2403db43 scat slave 2403db43