Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. Suspension bracket and steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. Stabilizer of a forward suspension bracket
   9.4. Rotary fist
   9.5. Forward nave and bearing
   9.6. Spherical support
   9.7. Top lever
   9.8. Lower lever
   9.9. Back shock-absorbers
   9.10. Back stabilizer of cross stability
   9.11. Cross bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. Steering wheel
   9.15. Tip of steering drafts
   9.16. Cover of the steering mechanism
   9.17. Steering mechanism
   9.18. Pump of the hydraulic booster
   9.19. Power steering
   9.20. Angles of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries



9.9. Back shock-absorbers

GENERAL INFORMATION

Details of fastening of the back shock-absorber

1. Washers

2. Pillows

3. Shock-absorber

4. Plugs

Removal and installation

PERFORMANCE ORDER
1. Lift a back part of the car, having substituted supports under a bridge beam, and remove wheels.
2. Disconnect the lower fastenings (are specified by shooters) shock-absorbers.
3. Turn off a nut of the top fastening (it is specified by an arrow). For this purpose record a nut a key, and rotate the shock-absorber.
4. Installation is carried out upside-down.
5. Track correctness of installation of details.

2403db43 2403db43