| 1. Lift a back part of the car. |
| 2. Establish supports under a bridge beam. |
| 3. Disconnect the regulator of pressure of brakes from the bridge. |
|
4. Disconnect a bar from a frame arm (the arrow specified a fastening nut). |
|
5. Disconnect a bar from an arm of the back bridge (the arrow specified a fastening nut). |
| 6. Remove a bar. |
| 7. Installation is carried out upside-down. |
| 8. It is final to tighten nuts of fastening of a bar only after lowering of the car |
