Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. Suspension bracket and steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. Stabilizer of a forward suspension bracket
   9.4. Rotary fist
   9.5. Forward nave and bearing
   9.6. Spherical support
   9.7. Top lever
   9.8. Lower lever
   9.9. Back shock-absorbers
   9.10. Back stabilizer of cross stability
   9.11. Cross bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. Steering wheel
   9.15. Tip of steering drafts
   9.16. Cover of the steering mechanism
   9.17. Steering mechanism
   9.18. Pump of the hydraulic booster
   9.19. Power steering
   9.20. Angles of installation of forward wheels
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


2403db43

9.8. Lower lever

GENERAL INFORMATION

Lower lever of a suspension bracket of the Toyota 4-Runner/Hilux/Surf car

1. Back clown
2. Buffer 2
3. Lever
4. Buffer 1
5. Forward clown

Removal and installation

PERFORMANCE ORDER
1. Lift a front of the car and remove wheels.
2. Remove the steering mechanism (see subsection 9.17).
3. Disconnect a suspension bracket rack from the lower lever.
4. Remove draft of the stabilizer and a collar of the plug near the removed lever.
5. Designate position of adjusting clowns.
6. Turn off nuts and bolts of axes.
7. Remove the lever.
8. Installation is carried out upside-down.
9. At assembly establish clowns on the tags put when dismantling.
10. Finally tighten bolts and nuts of an axis of the lever after lowering of the car.