Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
- 10. Body
   10.1. Maintenance and repair of a body
   10.2. Vinyl finishing
   10.3. Upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. Windshield and motionless glasses
   10.8. Cowl
   10.9. Latch of the lock of a cowl and cable
   10:10. Forward lattice
   10:11. Bumpers
   10:12. Facing panel of a door
   10:13. External mirror
   10:14. Door
   10:15. Forward wing
   10:16. Door of a cargo compartment
   10:17. Glass of a door of a cargo compartment and window regulator
   + 10:18. Glasses of doors
   10:19. Window regulator
   10:20. Lock clamp, switch of the lock and door handles
   10:21. Casing of a steering column
   10:22. Central floor section
   10:23. Panels of forward facing of salon
   10:24. Panel of forward facing of salon
   10:25. Air inlet lattice
   10:26. Seats
+ 11. Electric equipment
+ 12. Electrical circuitries

10:23. Panels of forward facing of salon

GENERAL INFORMATION

Panels of forward facing of salon

1. Central channel of an air duct
2. N4 air duct
3. N2 air duct
4. Side arm
5. Lower facing N2 panel
6. Intensifying level of a glove box
7. Glove box
8. Heater panel
9. Receiver
10. Bell of a side slip
11,14. Overlay of powder of a forward door
12. Overlay of a wheel
13. Wheel
15. Cover of the block of safety locks
16. Combination of switches
17. Top part of a casing of a steering column
18. Overlay of the lighter

19. Lamp of a drum of the lock of ignition
20. Central facing panel
21. Overlay of the switch of a starter
22. Lower part of a casing of a steering column
23. Steering column assembled
24. Facing of a guard of devices
25. Combination of devices
26. Panel of forward facing
27, 31. Arm
28. Defroster nozzle
29. Intensifying section of the panel of forward facing
30. N1 air duct
32. Ashtray
33. Holder of an ashtray

Removal and installation

PERFORMANCE ORDER

1. Disconnect the battery from weight.
2. Disconnect a safety cushion (see subsection 11.44).
3. Remove a wheel.
4. Remove a casing of a steering column.
	5. Remove an arm of the top panel, remove the lower central cover.
6. Remove N2 air duct.

7. Unscrew screws of the lower left facing panel with left (a photo at the left) and with right (a photo on the right) the parties.
8. Get the panel and remove the cowl lock lever.

9. Unscrew screws of fastening of average (a photo at the left) and lower (a photo on the right) parts of the central facing panel and remove the panel.
10. Disconnect sockets of wires.
11. Hook and remove facing of the lighter, remove an ashtray and the holder.
	12. Hook and get facing of the lock of ignition.
	13. Unscrew screws of facing of a guard of devices.
14. Give facing on yourself and disconnect the socket of the switch and the regulator of light of headlights.
15. Remove facing of a guard of devices.
16. Hook and remove the handle of the switch of light of headlights, turn off a nut and remove the switch.
	17. Turn off screws (are specified by shooters) doors of a glove box. Remove a door.
	18. For removal of a level unscrew 2 screws and a bolt (are specified by shooters). Remove a level.