Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
- 10. Body
   10.1. Maintenance and repair of a body
   10.2. Vinyl finishing
   10.3. Upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. Windshield and motionless glasses
   10.8. Cowl
   10.9. Latch of the lock of a cowl and cable
   10:10. Forward lattice
   10:11. Bumpers
   10:12. Facing panel of a door
   10:13. External mirror
   10:14. Door
   10:15. Forward wing
   10:16. Door of a cargo compartment
   10:17. Glass of a door of a cargo compartment and window regulator
   + 10:18. Glasses of doors
   10:19. Window regulator
   10:20. Lock clamp, switch of the lock and door handles
   10:21. Casing of a steering column
   10:22. Central floor section
   10:23. Panels of forward facing of salon
   10:24. Panel of forward facing of salon
   10:25. Air inlet lattice
   10:26. Seats
+ 11. Electric equipment
+ 12. Electrical circuitries

10:16. Door of a cargo compartment

Removal, installation and adjustment

Prevention

Works are performed together.

PERFORMANCE ORDER

1. Disconnect the battery from weight.
2. Open a door of a compartment and reliably fix.

3. To remove racks of a door of a cargo compartment, turn off top (a photo at the left) and the lower bolts (a photo on the right).
	4. To disconnect sockets of wires of a door, get a sealant.
	5. Outline contours of loops on a door and turn off bolts (are specified by shooters).
6. Installation is carried out upside-down.
7. If it is necessary to replace the door lock, then remove the facing panel, a cover of a service opening, a glass fringing, a window regulator and guides (see subsection 10.17).
	8. For removal of a pusher turn off 2 nuts.
9. Remove a pusher and draft of remote opening of a door.
10. The overlay of a niche of registration plate fastens a nut and 5 latches.
11. Turn off a nut and remove a slip, having hooked a scraper.
12. Turn off nuts and remove the lock switch, disconnect the socket.
	13. Then find draft of the lock and disconnect a cable then disconnect draft.
	14. Turn off 3 bolts (are specified by shooters) and remove the lock.
15. Installation is carried out upside-down.
	16. For adjustment of a door in the direction "back-forward" release nuts of fastening of loops to a body.
17. Easy blows displace a loop in the necessary direction and tighten nuts.
18. For adjustment of a door in the "to the left-to the right" and "up-down" directions release bolts of fastening of loops to a door, displace a door in the necessary direction and tighten bolts.
	19. For adjustment of a clamp of the lock release screws (are specified by shooters).
20. Easy blows displace a clamp before normal gearing with a clamp.
21. Tighten screws.
22. Installation is carried out upside-down.