Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
- 10. Body
   10.1. Maintenance and repair of a body
   10.2. Vinyl finishing
   10.3. Upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. Windshield and motionless glasses
   10.8. Cowl
   10.9. Latch of the lock of a cowl and cable
   10:10. Forward lattice
   10:11. Bumpers
   10:12. Facing panel of a door
   10:13. External mirror
   10:14. Door
   10:15. Forward wing
   10:16. Door of a cargo compartment
   10:17. Glass of a door of a cargo compartment and window regulator
   + 10:18. Glasses of doors
   10:19. Window regulator
   10:20. Lock clamp, switch of the lock and door handles
   10:21. Casing of a steering column
   10:22. Central floor section
   10:23. Panels of forward facing of salon
   10:24. Panel of forward facing of salon
   10:25. Air inlet lattice
   10:26. Seats
+ 11. Electric equipment
+ 12. Electrical circuitries


2403db43

10:20. Lock clamp, switch of the lock and door handles

Removal and installation

PERFORMANCE ORDER
1. On the cars equipped with the electric drive of windows disconnect the battery from weight.
2. Remove facing of a door and the screen.
Clamp
3. Remember an order of connection of drafts with a latch, having illuminated a powerful lamp.
4. Disconnect from the draft lock.
5. Disconnect the socket (on the car with the lock electric drive).
6. Unscrew screws (are specified by shooters) and remove a clamp.
7. Installation is carried out upside-down.
External handle and switch of the lock
8. Remember an order of connection of drafts with the handle and the switch of the lock (are specified by shooters) (in the presence of the electric drive draft of the lock is absent), disconnect drafts.
9. Get a cap and turn off bolts (are specified by shooters) the handle and the switch, remove the handle.
10. Installation is carried out upside-down.
Internal handle
11. The internal handle is removed at facing removal (see subsection 10.12).
12. Installation is carried out upside-down.