Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
- 10. Body
   10.1. Maintenance and repair of a body
   10.2. Vinyl finishing
   10.3. Upholstery and rugs
   + 10.4. Repair of insignificant damages of a body
   10.5. Repair of considerable damages of a body
   10.6. Loops and locks
   10.7. Windshield and motionless glasses
   10.8. Cowl
   10.9. Latch of the lock of a cowl and cable
   10:10. Forward lattice
   10:11. Bumpers
   10:12. Facing panel of a door
   10:13. External mirror
   10:14. Door
   10:15. Forward wing
   10:16. Door of a cargo compartment
   10:17. Glass of a door of a cargo compartment and window regulator
   + 10:18. Glasses of doors
   10:19. Window regulator
   10:20. Lock clamp, switch of the lock and door handles
   10:21. Casing of a steering column
   10:22. Central floor section
   10:23. Panels of forward facing of salon
   10:24. Panel of forward facing of salon
   10:25. Air inlet lattice
   10:26. Seats
+ 11. Electric equipment
+ 12. Electrical circuitries


2403db43

10:11. Bumpers

GENERAL INFORMATION

Bumper
1. Wing apron arm, left
2. Side arm, left
3. Index of turn, left
4. Index of turn, right
5. Buffer panel
6. Bumper
7. Side arm, right
8. Wing apron arm, right
9, 10. Forward arms (right and left)

Details of a rear bumper

1. Back right mud-reflector
2. Side slip, right
3. Arm
4, 6. Sealant
5. Slip
7. Side slip, left
8. Back left mud-reflector
9, 10. Arm
11. Bumper cross-piece

Removal and installation

PERFORMANCE ORDER
Front bumper
1. Remove a forward lattice.
2. Remove indexes of turns.
3. Turn off bolts of fastening of a bumper to forward and side arms and remove a bumper.
4. Installation is carried out upside-down.
Rear bumper
5. When replacing a bumper be guided rice. Details of a rear bumper.
6. Installation is carried out upside-down.