| 1. Take off a gear belt and asterisks of cam-shafts. |
| 2. Turn off bolts and remove a back cover of a belt. |
| 3. Determine epiploon press fitting depth, then carefully get an epiploon from the case of the oil pump, having hooked the screw-driver. |
| 4. Clear an opening under an epiploon and slightly oil an external surface of an epiploon for the engine. Grease working edges of an epiploon with universal lubricant. |
|
5. Carefully without distortions press a new epiploon into place by means of a mandrel with a diameter a little smaller what diameter of an epiploon. |
| 6. Establish other details, start the engine and be convinced of lack of a leak. |
