Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. Mechanical transmission
   - 6.2. Automatic transmission
      6.2.1. Specifications
      6.2.2. Diagnostics of transmission
      6.2.3. Gate drive cable
      6.2.4. Draft of transmission
      6.2.5. The blocking switch
      6.2.6. System of fixing of transfers
      6.2.7. Lever of change of transfers
      6.2.8. Removal and installation of transmission
   + 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries

6.2.4. Draft of transmission

Adjustment

PERFORMANCE ORDER

1. Transfer the selector to all provisions, at the same time operation of a clamp has to be felt. If operation is not felt, or the index does not coincide with designations, then draft needs to be adjusted.
2. Lift the car.
	3. Release a nut of fastening of thirst for the selector (2) (1 – neutral situation).
4. Displace the lever (the lower part of the selector) clockwise against the stop, then displace back on 2 clicks. Install the selector in situation N.
5. Tighten a nut with the set moment.
6. Adjust the blocking switch (see subsection 6.2.5).
7. Check adjustment. The selector has to be fixed in all provisions, and the engine has to be started only in provisions P or N. If necessary repeat adjustment.