Bolts of the regulator and hoses (4-cylinder engine)
1. Pressure regulator
2. Return hose
|
3. Ring
4. The operating vacuum hose |
Pressure regulator on the V6 engine
1. Ring
2. Pressure regulator |
3. Return hose
4. Burn down conductings |
Check
See subsection 5.3.3.
Replacement
| PERFORMANCE ORDER |
| 1. Execute a decompression and disconnect the battery from weight. |
| 2. Disconnect a vacuum hose from the regulator. |
| 3. Disconnect the return fuel hose from the regulator, having pressed it. |
| 4. Turn off bolts of fastening of the regulator of pressure of fuel and remove the regulator. |
| 5. Installation is carried out upside-down. Replace ring laying. |
|
|
