Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
- 5. Fuel and exhaust systems
   5.1. Specifications
   5.2. Order of a decompression of fuel system
   + 5.3. Fuel pump and pressure of fuel
   5.4. Hoses and connections
   5.5. Fuel tank
   5.6. Fuel pump
   5.7. Fuel level sensor
   5.8. Air filter
   5.9. Cable of a butterfly valve
   + 5.10. System of electronic injection of fuel (EFI system)
   + 5.11. Units of system of injection of fuel
   5.12. Service of the exhaust system
   + 5.13. System of decrease in toxicity of exhaust gases
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


2403db43

5.1. Specifications

GENERAL INFORMATION

Fuel pressure
Ignition is included, the engine does not work
2,5 – 3,0 kgfs/cm2
Pressure idling:
  – the vacuum hose of the regulator of pressure is disconnected
2,5 – 2,9 kgfs/cm2
  – the hose of the regulator is attached
2,0 – 2,4 kgfs/cm2
Pressure in fuel system after an engine stop
1,4 kgfs/cm2
Electric resistance of a nozzle
12 – 16 Ohms
Resistance of the control air valve of idling (IAC valve)
17 – 25 Ohms (it is below 50 °C), 20 – 30 Ohms (it is above 50 °C)
For l engines 1,6 and 1,8
19 – 23 Ohms.
Resistance of an auxiliary nozzle
2 – 4 Ohms
Idling turns

Inhaling moments (N. of m)

Bolts and nuts of the case of a butterfly valve
14,4
Bolts of fastening of the distributor of fuel ("comb")
13,2
Union of the fuel highway
29

Bolts of the leveling camera

15,6