Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
- 5. Fuel and exhaust systems
   5.1. Specifications
   5.2. Order of a decompression of fuel system
   + 5.3. Fuel pump and pressure of fuel
   5.4. Hoses and connections
   5.5. Fuel tank
   5.6. Fuel pump
   5.7. Fuel level sensor
   5.8. Air filter
   5.9. Cable of a butterfly valve
   + 5.10. System of electronic injection of fuel (EFI system)
   + 5.11. Units of system of injection of fuel
   5.12. Service of the exhaust system
   + 5.13. System of decrease in toxicity of exhaust gases
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


5.5. Fuel tank


The fuel tank and the accompanying details

1. Ventilating tube
2, 5. Laying
3. Gate-type valve
4. Mouth
6. Pillow
7. Jellied pipe top
8. Cover
9. Stopper
10. Guard
11. Tape of fastening of a tank
12. Mouth hose
13. Tube
14. Tank
15. Arm
16. Holder of tubes
17. Pump
18. The guard is lower


1. Devastate a tank a trip or through a drain stopper. Turn off a tank mouth stopper to take off residual pressure.
2. Disconnect the battery from weight.
3. Lift a back part of the car and establish on supports.
4. Merge the gasoline remains through a hose or a stopper.
5. Unscrew screws (are specified by shooters) and disconnect a mouth.
6. Disconnect and muffle hoses (are specified by shooters).
7. Release bolts of fixing tapes of a tank.
8. Remove guards. Establish a prop under a tank.
9. Disconnect coupling tapes of a tank and take aside.
10. Lower a tank so that it was possible to disconnect the socket of conducting and the tire of grounding from the pump and the fuel level sensor (if wires and the tire are not disconnected any more).
11. Remove a tank.


1. Installation is carried out upside-down.
2. If the car is equipped with a spare tank, then this tank can be removed, having turned off bolts on its perimeter.


Repair of a tank is carried out by skilled experts. Independently it is forbidden to repair a tank the soldering or welding.