Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. 4-cylinder engines
   + 3.2. V6 3,0 engines of l (1993-1994) and 3,4 l (since 1995)
   - 3.3. Dismantle and capital repairs of the engine
      3.3.1. Specifications
      + 3.3.2. Capital repairs
      3.3.3. Diagnostics of the engine by means of the vacuum gage
      3.3.4. Check of a compression in engine cylinders
      + 3.3.5. Dismantle of the power unit
      - 3.3.6. Head of cylinders
         3.3.6.1. Dismantling of a head of cylinders
         3.3.6.2. Cleaning and check of a head of cylinders
         3.3.6.3. Assembly
      3.3.7. Valves
      3.3.8. Conrod and piston group
      + 3.3.9. Crankshaft
      3.3.10. Block of cylinders
      3.3.11. Honningovaniye of cylinders
      + 3.3.12. Rods and pistons
      3.3.13. Radical and conrod bearings
      3.3.14. Balancer shafts
      3.3.15. Assembly order
      3.3.16. Piston rings
      3.3.17. Launch of the engine after repair and a running in
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries

3.3.6.3. Assembly

GENERAL INFORMATION

Before assembly it is necessary to be convinced of purity of a head of the block irrespective of repairs of this detail in car service were made or not.

PERFORMANCE ORDER

	1. If the head of the block was under repair in car service, then measure spring height in the established state.
2. Establish all details of the valvate mechanism upside-down.
	3. At a napressovka of oil scraper caps you remember that caps of inlet and final valves differ.
	4. Before assembly grease crackers for their temporary fixing.