Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. 4-cylinder engines
   + 3.2. V6 3,0 engines of l (1993-1994) and 3,4 l (since 1995)
   - 3.3. Dismantle and capital repairs of the engine
      3.3.1. Specifications
      + 3.3.2. Capital repairs
      3.3.3. Diagnostics of the engine by means of the vacuum gage
      3.3.4. Check of a compression in engine cylinders
      + 3.3.5. Dismantle of the power unit
      + 3.3.6. Head of cylinders
      3.3.7. Valves
      3.3.8. Conrod and piston group
      + 3.3.9. Crankshaft
      3.3.10. Block of cylinders
      3.3.11. Honningovaniye of cylinders
      + 3.3.12. Rods and pistons
      3.3.13. Radical and conrod bearings
      3.3.14. Balancer shafts
      3.3.15. Assembly order
      3.3.16. Piston rings
      3.3.17. Launch of the engine after repair and a running in
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


2403db43

3.3.15. Assembly order

GENERAL INFORMATION

On 4-cylinder engines:

 – piston rings;
 – crankshaft and radical bearings;
 – pistons with rods;
 – back epiploon of the crankshaft;
 – head of cylinders;
 – cam-shafts;
 – balancer shafts;
 – chain;
 – oil pump;
 – oil receiver;
 – pallet;
 – collectors;
 – cover of a head of cylinders;
 – flywheel (drive plate).

On V6 engines:

 – piston rings;
 – crankshaft and radical bearings;
 – pistons with rods;
 – back epiploon of the crankshaft and holder;
 – oil pump;
 – pallet;
 – heads of cylinders;
 – cam-shafts and pushers;
 – gear belt and asterisks;
 – belt covers;
 – collectors;
 – covers of a head of cylinders;
 – flywheel (drive plate).