Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car

Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   - 6.1. Mechanical transmission
      6.1.1. Specifications
      6.1.2. A back epiploon of the check point (on rear wheel drive cars)
      6.1.3. Check point case support
      6.1.4. Check point control lever
      6.1.5. Removal and installation of the manual transmission
   + 6.2. Automatic transmission
   + 6.3. Transfer case
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries

6.1.3. Check point case support

Check and replacement

PERFORMANCE ORDER

	1. Having pushed mount between a cross-piece and a pillow of a support also shake.
2. The case should not be displaced strongly from a support. At detection of wear of a support (rubber peeling), replace a support.

3. Substitute a jack or an emphasis on a check point case and turn off nuts and bolts of support (on a photo bolts of fastening of the check point of rear wheel drive cars, on a photo on the right – bolts of a support and a cross-piece of the check point of all-wheel drive cars are shown at the left).
4. Raise a case and get a support.
5. Installation is carried out upside-down.