Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and operation of the car



Toyota 4ranner
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Systems of heating, ventilation
   4.1. Specifications
   4.2. Antifreeze
   4.3. Thermostat
   4.4. Krylchatka of the fan and hydraulic clutch
   4.5. Radiator and tank
   4.6. Oil cooler
   + 4.7. Pump
   4.8. Liquid temperature sensor
   4.9. Electric motor and chain of the fan of a heater
   4.10. Heater radiator
   4.11. Control panel of the conditioning block
   + 4.12. Air conditioning system
   4.13. Compressor
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. Suspension bracket and steering
+ 10. Body
+ 11. Electric equipment
+ 12. Electrical circuitries


2403db43

4.13. Compressor

GENERAL INFORMATION

Details of fastening of the compressor on the 4-cylinder engine

1. Arm
2. Belt
3. Engine guards
4. To tighten a dynamometer key
5. Final hose
6. The sucking-in hose
7. Ring

The compressor and adjacent details on the l V6 3.4 engine

1. Pump of the hydraulic booster
2, 3. Belt
4. Engine guards
5. To tighten a dynamometer key
6. Final hose
7. The sucking-in hose
8. Ring
9. Arm

Removal

PERFORMANCE ORDER
1. Depressurize the conditioner and remove coolant in car service.
2. Disconnect the battery from weight.
3. Take off a belt from the compressor.
4. Disconnect the socket and disconnect coolant tubes.
5. Turn off bolts of fastening of the compressor and remove the compressor.
6. If the new compressor is installed, then perform all procedures specified in the enclosed instruction.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down.
2. Replace all sealing rings, having picked up them as the compressor.